LC 100W 48V SC SNC
Product description
- Constant voltage LED driver
- Output voltage 48 V
- Max. output power 100 W
- Dimmable via external PWM LED dimmers attached on output side
- For luminaires of protection class I and protection class II
- Possible to connect on / off 48 V DC / DC boards
- The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
- Nominal lifetime up to 50,000 h
- 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Common Data
Approval marks:
| Rated supply voltage | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| Mains frequency | 50 / 60 Hz |
| Overvoltage protection | 320 V AC, 48 h |
| Typ. rated current (at 230 V, 50 Hz, full load) | 476 mA |
| Typ. input current in no-load operation | < 20 mA |
| In-rush current (peak / duration) | 51.4 A / 232 µs |
| Max. input power | 109 W |
| Typ. input power in no-load operation | < 0.5 W |
| Typ. efficiency (at 230 V, 50 Hz, full load) | 92.5 % |
| λ over full operating range (max.) | 0.98 |
| λ over full operating range (min.) | 0.8 C |
| THD (at 230 V, 50 Hz, full load) | < 10 % |
| Starting time (at 230 V, 50 Hz, full load) | < 0.5 s |
| Turn off time (at 230 V, 50 Hz, full load) | < 0.5 s |
| Hold on time at power failure (output) | 0 s |
| Output voltage tolerance | ± 2 V |
| Output LF voltage ripple (< 120 Hz) | ± 1.5 % |
| Output P_ST_LM (at full load) | ≤ 1 |
| Output SVM (at full load) | ≤ 0.4 |
| Max. output voltage (U-OUT) | 50 V |
| Mains surge capability (between L - N) | 1 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| Burst capability | 1 kV |
| Type of protection | IP20 |
| Length | 295 mm |
| Width | 43 mm |
| Height | 30 mm |
| Lifetime | up to 50000 h |
| Guarantee | 5 years |
Отзывов: 0
