DM 4 T KNX
Модель:
5196Артикул:
4940275Наличие:
Есть в наличии
0.00 LEI
Ambient temperature
-5°C ... 45°CEnergy saving lamps
Trailing edge (RC-mode): 400 WFunction description
- 4-way universal dimmer actuator FIX2
- For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps
- Also suitable for dimming of dimmable energy-saving lamps
- Also suitable for controlling fans
- LED switching status display for each channel
- Manual operation on device (even without bus connection)
- Dimming output: 400 W/VA per channel or 800 W/VA in parallel operation
- The dimming output can be upgraded by using additional dimmboosters "DMB 1 T KNX" - dimming output 300 W/VA for each dimmbooster. Output to a maximum of 2000 W/VA by using max. 4 boosters possible
- Automatic load detection (can be deactivated)
- For R, L and C loads
Ambient temperature
-5°C ... 45°CEnergy saving lamps
Trailing edge (RC-mode): 400 WFrequency
50 HzIncandescent/halogen lamp load
400 WInstallation type
DIN railLamp types
Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LEDMax. cable cross section
Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²Max. cable length
100 mNumber of channels
4Operating voltage
230 V AC, 50 HzOperating voltage KNX
Bus voltage, ≤4 mAProtection class
II according to EN 60 669Stand-by consumption
~1.5 WSwitching capacity min.
5 WType of connection
Terminal screws | Bus connection: KNX bus terminalType of protection
IP 20Width
8 modulesОтзывов: 0