DME 2 T KNX
Модель:
5178Артикул:
4930275Наличие:
Есть в наличии
0.00 LEI
Ambient temperature
-5°C ... 45°CEnergy saving lamps
Trailing edge (RC-mode): 400 WFunction description
- 2-way universal dimmer actuator MIX2
- Extension module MIX2
- For upgrading to maximum of 6 channels
- For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps
- Also suitable for dimming of dimmable energy-saving lamps
- Also suitable for controlling fans
- Up to two extension modules MIX or MIX2 can be connected to one base module
- Device and KNX bus module can be swapped independently of each other
- Removable KNX bus module enables devices to be changed without reprogramming
- Manual set-up and use of switching actuators is possible without KNX bus module
Ambient temperature
-5°C ... 45°CEnergy saving lamps
Trailing edge (RC-mode): 400 WFrequency
50 HzInstallation type
DIN railLamp types
Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LEDMax. cable cross section
Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²Max. cable length
100 mNumber of channels
2Operating voltage
230 V AC, 50 HzProtection class
II according to EN 60 669Stand-by consumption
~0.6 WSwitching capacity in parallel operation
800 WSwitching capacity min.
5 WSwitching capacity per channel
400 WType of connection
Screw terminalsType of protection
IP 20Width
4 modulesОтзывов: 0