JMG 4 T 24V KNX
Модель:
5198Артикул:
4930260Наличие:
Есть в наличии
0.00 LEI
Ambient temperature
-5°C ... 45°CFrequency
50 - 60 HzFunction description
- 4-way blind actuator 24V MIX2
- Base module MIX2
- Can be upgraded to maximum of 12 channels
- For controlling 24V drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
- Up to 2 extension modules can be connected to a base module
- Up to two extension modules MIX or MIX2 can be connected to one base module
- Device and KNX bus module can be swapped independently of each other
- Removable KNX bus module enables devices to be changed without reprogramming
- Manual set-up and use of actuators is possible without KNX bus module
- Free combination of switches, dimming, blinds and heating control as well as binary inputs
Ambient temperature
-5°C ... 45°CFrequency
50 - 60 HzInstallation type
DIN railMax. cable cross section
Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²Number of channels
4Operating voltage
110 V AC - 240 V AC, 50 Hz - 60 HzOperating voltage KNX
Bus voltage, ~4 mAOutput
Changeover contact, 6 AProtection class
II according to EN 60 730-1Stand-by consumption
~0.3 WSwitching capacity
6 A at 24 V DCSwitching output
Potential-free, for SELV, if the whole device switches SELVType of connection
Terminal screws | Bus connection: KNX bus terminalType of protection
IP 20Width
4 modulesОтзывов: 0